Xconfiguration Conference Multistream Mode; H323 Configuration; Xconfiguration H323 Authentication Mode; Xconfiguration H323 Authentication Loginname - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xConfiguration Conference MultiStream Mode

The video system supports multistream video for conferences, provided that the conference
infrastructure supports the feature (Cisco TelePresence Server 4.2 or later). This means that
the video system can compose the video streams locally into a conference layout which utilizes
all available screens. This results in an enhanced user experience.
Multistream video is supported only via SIP.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration Conference MultiStream Mode:
where
Mode
: Auto/Off
Auto: Use local composition of video streams if the feature is supported by the confer-
ence infrastructure.
Off: Local composition is disabled. Layouts will be transcoded by the conference infra-
structure (Cisco TelePresence Server).
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API xConfiguration xConfiguration
Mode
xCommand

H323 configuration

xConfiguration H323 Authentication Mode

Define the authenticatin mode for the H.323 profile.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration H323 Authentication Mode:
where
Mode
: Off/On
Off: The system will not try to authenticate itself to a H.323 Gatekeeper, but will still try a
normal registration.
On: If an H.323 Gatekeeper indicates that it requires authentication, the system will try
to authenticate itself to the gatekeeper. Requires the H323 Authentication LoginName
and H323 Authentication Password settings to be defined on both the codec and the
Gatekeeper.

xConfiguration H323 Authentication LoginName

The system sends the H323 Authentication Login Name and the H323 Authentication Password
to an H.323 Gatekeeper for authentication. The authentication is a one way authentication from
the codec to the H.323 Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the
H.323 Gatekeeper indicates that no authentication is required, the system will still try to register.
Requires the H.323 Authentication Mode to be enabled.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration H323 Authentication LoginName: "LoginName"
where
LoginName
: String (0, 50)
The authentication login name.
49
API Reference Guide
xStatus Appendices
Mode
Copyright © 2016 Cisco Systems, Inc. All rights reserved.