Xcommand Callhistory Recents; Camera Commands; Xcommand Camera Positionreset - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xCommand CallHistory Recents

Retrieve aggregated information on previous calls made on the video system.
Requires user role: ADMIN, USER
USAGE:
xCommand CallHistory Recents [Filter: Filter] [Offset: Offset] [Limit: Limit]
[DetailLevel: DetailLevel] [SearchString: "SearchString"] [CallHistoryId:
CallHistoryId] [Order: Order]
where
Filter: All/Missed/AnsweredElsewhere/Forwarded/Placed/NoAnswer/Received/Rejected/
UnacknowledgedMissed
You can filter which calls to retrieve.
Offset: Integer (0..65534)
Sets the call from which to start.
Limit: Integer (0..65534)
Defines the amount of calls in the output.
DetailLevel: Basic/Full
Sets the level of detail for the information on these calls.
SearchString: String (0, 255)
Allows you to set the command to apply to a specified display name or call back
number.
CallHistoryId: Integer (0..65534)
CallHistoryId for the call in question.
Order: OccurrenceTime/OccurrenceFrequency
Define the order in which the previous calls are presented.
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API xConfiguration xCommand xCommand

Camera commands

xCommand Camera PositionReset

Reset the camera position to default position.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera PositionReset [Axis: Axis] CameraId:
where
Axis: All/Focus/PanTilt/Zoom
Select which motor to reset. If not specified all are reset.
CameraId: Integer (1..1)
The ID of the camera preset you want to reset.
100
API Reference Guide
xStatus Appendices
CameraId
Copyright © 2016 Cisco Systems, Inc. All rights reserved.