Xcommand Callhistory Deleteentry; Xcommand Callhistory Get - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xCommand CallHistory DeleteEntry

Deletes all information on the specified call.
Requires user role: ADMIN, USER
USAGE:
xCommand CallHistory DeleteEntry CallHistoryId:
[AcknowledgeConsecutiveDuplicates: AcknowledgeConsecutiveDuplicates]
where
CallHistoryId: Integer (1..2147483647)
CallHistoryId for the call in question. Run xCommand CallHistory Get to get the id
number.
AcknowledgeConsecutiveDuplicates: False/True
You can include or exclude all surrounding calls with duplicate information.
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API xConfiguration
CallHistoryId
xCommand xCommand

xCommand CallHistory Get

Retrieve all information on previous calls made on the video system.
Requires user role: ADMIN, USER
USAGE:
xCommand CallHistory Get [Filter: Filter] [Offset: Offset] [Limit: Limit]
[DetailLevel: DetailLevel] [SearchString: "SearchString"] [CallHistoryId:
CallHistoryId]
where
Filter: All/Missed/AnsweredElsewhere/Forwarded/Placed/NoAnswer/Received/Rejected/
UnacknowledgedMissed
You can filter which calls to retrieve.
Offset: Integer (0..65534)
Sets the call from which to start.
Limit: Integer (0..65534)
Defines the amount of calls in the output.
DetailLevel: Basic/Full
Sets the level of detail for the information on these calls.
SearchString: String ( 0, 255)
Allows you to set the command to apply to a specified display name or call back
number.
CallHistoryId: Integer (0..65534)
CallHistoryId for the call in question.
99
API Reference Guide
xStatus Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.