Cisco Firepower 4110 Hardware Installation Manual page 9

Overview
Figure 2: Firepower 4100 Package Contents
1 Firepower 4100 chassis
3 Two power cords (country-specific)
See
a list of supported power cords.
5 Two slide rails
7 Artesyn tie wrap
9 Two M3 x 6 mm screws used to secure the inner
slide rail to the chassis
11 Two slide rail locking brackets
13 One ground lug #6 AWG, 90 degree, #10 post
15 Cisco Firepower 4100
This document has a URL pointing to the
hardware installation guide, a URL pointing the
regulatory and safety guide, and a QR code and
URL pointing to the Getting Started Guide.
Power Cord Specifications, on page 32
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
2 Blue console cable PC terminal adapter
4 10/100/1000BASE-T SFP transceiver
for
6 Tie wrap clamp
8 Flextronics tie wrap
10 Ten 8-32 x 0.375 inch Phillips screws used to
secure the mounting bracket to chassis (six
screws), and the cable management brackets to
the mounting brackets (four screws)
12 Two 10-32 x 0.375 inch screws used to secure
the ground lug
14 Two cable management brackets
Package Contents
5