Cisco Firepower 4110 Hardware Installation Manual page 65

Installation, Maintenance, and Upgrade
Warning
Warning
Warning
Warning
Step 1 Save your configuration.
Step 2
Power down the chassis by moving the power switch to the OFF position. See
about the power switch.
Step 3
To remove an SSD, face the front of the chassis, loosen the two captive screws on the SSD, and gently pull it out of slot
1 of the chassis.
Statement 1030 Equipment Installation
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1040 Product Disposal
Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1073 No User-Serviceable Parts
There are no serviceable parts inside. To avoid risk of electric shock, do not open.
Statement 1077 Do Not Operate Unit Without Covers
The covers are an integral part of the safety design of the product. Do not operate the unit without the
covers installed.
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
Remove and Replace the SSD
Features, on page 1 for more information
61