Cisco Firepower 4110 Hardware Installation Manual page 7

Overview
Feature
Maximum number
of interfaces
Management port
Serial port
USB port
Network ports
Small form-factor
pluggable (SFP)
ports
Pullout asset card
Grounding lug
Locator beacon
Power switch
Network modules
Supported network
modules
AC power supply
DC power supply
Redundant power
4110 4120
24
With two 8-port network modules installed
One Gigabit Ethernet
Supports 1-Gb fiber or copper small form-factor pluggable (SFP)
One RJ-45 console
One USB 2.0 Type A
Eight fixed 1-Gb and 10-Gb SFP ports (named Ethernet 1/1 through 1/8)
Eight fixed 1-Gb and 10-Gb SFP ports
See Supported SFP/SFP+ and QSFP Transceivers, on page 24
transceivers.
Displays the serial number; on the front panel
On rear panel
On front panel
On rear panel
Two network module slots (named network module 2 and network module 3)
• 8-port 10-Gigabit Ethernet SFP+
• 4-port 40-Gigabit Ethernet QSFP+
• 8-port 1-Gigabit Ethernet copper with hardware bypass
• 2-port 40-Gigabit Ethernet QSFP+ (built-in) with hardware bypass
• 6-port 1-Gigabit Ethernet SX fiber SFP+ (built-in) with hardware bypass
• 6-port 10-Gigabit Ethernet SR fiber SFP+ (built-in) with hardware bypass
• 6-port 10-Gigabit Ethernet LR fiber SFP+ (built-in) with hardware bypass
Two (1+1) power supply module slots
Ships with one 400-W AC power supply
modules
Hot-swappable
Optional
1+1
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
4140 4150
for a list of supported
Two (1+1) power supply module slots
Ships with two 400-W AC power supply
modules
Hot-swappable
Features
3