Cisco Firepower 4110 Hardware Installation Manual page 6

Features
Figure 1: Firepower 4100 Series
The following table lists the features for the Firepower 4100 series.
Table 1: Firepower 4100 Series Features
Feature
Security standards
certifications
Form factor
Rack mount
Airflow
Processor
Memory
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
2
4110 4120
• Common Criteria (CC) and Commercial Solutions for Classified (CSFC) for ASA
9.8.x and FTD 6.2.x
• CC for the Network Device Collaborative Protection Profile (NDcPPv2.1) for
ASA 9.12.x and FX-OS 2.6.x
• Federal Information Processing Standards (FIPS) 140-2 on ASA 9.12.x, FTD
6.4.x, and FX-OS 2.6.x
• Department of Defense Information Network Approved Product List (DoDIN
APL) for ASA 9.12.x and FTD 6.4.x.
• US Government Compliance for IPv6 (USGv6) for ASA 9.8.x and FTD 6.2.x
See the "Security Certifications Compliance" chapter in the
Note
CLI Configuration Guide
Configuration Guide
1 RU
Fits a standard 19-in. (48.3cm) square-hole rack
Slide rails, mount ears, and screws included
4-post Electronic Industries Association (EIA)-310-D rack
Front to rear
Cold aisle to hot aisle
Single 12-core
64-GB DDR4 128-GB DDR4
DRAM DRAM
4140
or Cisco FXOS Firepower Chassis Manager
for the procedure to enable security modes.
Single 18-core
256-GB DDR4
DRAM
Overview
4150
Cisco FXOS
Single 22-core
256-GB DDR4
DRAM