Cisco Firepower 4110 Hardware Installation Manual page 17

Overview
Note Make sure you have the correct firmware package and software version installed to support this network
module. For instructions on how to verify your firmware package version and to upgrade the firmware if
necessary, see the
FXOS Compatibility
Note The FPR4K-NM-4X40G is NEBS-compliant.
Figure 9: FPR4K-NM-4X40G
1 Captive screw/handle
3 Ethernet X/1
5 Ethernet X/3
Cisco Firepower 4100/9300 FXOS Firmware Upgrade
for the software compatibility matrix.
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
Guide. See Cisco Firepower 4100/9300
2 Network activity LEDs
• Off—No connection or port is not in use.
• Amber—No link or network failure.
• Green—Link up.
• Green, flashing—Network activity.
• 40Gb—Only the leftmost LED indicates the
port status.
• 4x10Gb—Each of the port LEDS indicates
the status of respective 10-Gb channel.
4 Ethernet X/2
6 Ethernet X/4
40-Gb Network Module
13