Front Cover Installation - GE LOGIQ E9 Service Manual

GE
D 5573152-100, R
IRECTION
8-5-8-2

Front Cover installation

1. Thread the Front Cover so it fits in between
chassis and pedals.
Align the Front Cover guide pins with holes
in the frame.
Front Cover Assembly (cover on left and
probe plate on right) with guide pins.
Fasten Front Cover with two Phillips
screws.
2. Install the Foot Rest Bumper, the Top Cover and the Side Covers.
. 2
EV
Table 8-28 Front Cover installation
Steps
Chapter 8 Replacement procedures
LOGIQ E9 S
ERVICE
Corresponding Graphic
M
ANUAL
8 - 43