Standard Hazard Icons; Product Labels And Icons - GE Voluson E8 Service Manual

GE H RAFT
EALTHCARE
D KTD102576, R
IRECTION
1-2-2

Standard Hazard Icons

Important information will always be preceded by the exclamation point contained within
a triangle, as seen throughout this chapter. In addition to text, several different graphical
icons (symbols) may be used to make you aware of specific types of hazards that could
cause harm. Even if a symbol isn't used in this manual, it is included for your reference.
Table 1-4
ELECTRICAL
Other hazard icons make you aware of specific procedures that should be followed.
Table 1-5
AVOID STATIC ELECTRICITY
WEAR HAND PROTECTION
1-2-3

Product Labels and Icons

The following table describes the purpose and location of labels, safety icons and other important
information provided on the equipment.
BT Version:
Product labels and its location depend on BT-version and/or date of manufacture. For description of all
BT-Version:
symbols and labels used on the system, refer to Chapter 2 in the Basic User Manual of your system.
Table 1-6
LABEL/SYMBOL
Identification and
Rating Plate
1-8
7 DRAFT (A
EVISION
Standard Hazard Icons
MECHANICAL
Standard Icons Indicating a Special Procedure be Used
Product Labels and Icons
PURPOSE/MEANING
Manufacturer's name and address
Model and serial numbers
Electrical ratings
Section 1-2 - Important Conventions
23, 2012)
UGUST
RADIATION LASER
LASER
LIGHT
TAG AND LOCK OUT
TAG
&
LOCKOUT
Signed Date
WEAR FOOT PROTECTION
V E8 / V
OLUSON
S
ERVICE
HEAT
WEAR EYE PROTECTION
EYE
PROTECTION
or
LOCATION
rear side of system
on each probe
E6
OLUSON
M
ANUAL
PINCH