Up-D23Md Printer - Settings - GE Voluson E8 Service Manual

GE H DRAFT
EALTHCARE
D KTD102576, R
IRECTION
3-7-4-5

UP-D23MD Printer - Settings

1.) Call up the 'Printer Preferences'; operation see:
2.) Select the
3.) Select the
a.) Color Balance: Cyan = 0; Magenta = 0; Yellow = 0
b.) Gamma Select: Gamma 1
c.) Color Correction: set Printer Hardware Color Correction
d.) Lightness: Sharpness = 7 or 8; Dark = 0; Gamma = -12; Light = 8
4.) Save the adjusted printer settings with APPLY and OK. Close window and exit System Setup.
5.) Assign the Printer to the remote keys P1, P2, P3 and/or P4; see:
7 DRAFT (A
EVISION
PAPER page and set settings as shown in the left image at
GRAPHICS page. From the "Color Adjust" pop-up menu select:
Figure 3-48 Graphics page (Color Balance + Gamma Select)
Figure 3-49 Graphics page (Color Correction + Lightness)
Chapter 3 - Setup Instructions
23, 2012)
UGUST
Section 3-7-4 "Adjustment of Printer
V E8 / V
OLUSON OLUSON
S M
ERVICE
Settings".
Figure 3-45 on page
Section 3-7-5 on page 3-48.
E6
ANUAL
3-45.
3-47