Change The Region Code - GE Voluson E8 Service Manual

GE H DRAFT
EALTHCARE
D KTD102576, R
IRECTION
3-5-5-2-3

Change the Region Code

NOTE: To specify the correct region code, see:
1.) If not already done, switch on the Sony DVO-1000MD DVD recorder.
2.) Press the MENU button (A) located on the front of the DVD, see:
3.) The "Main Menu" appears on the LCD screen of the DVD recorder, see:
4.) Press the ↓ (down) button on the front of the recorder repeatedly until the [SETUP MENU] item
5.) Press the → (right) button. The "Setup Menu" appears, see
6.) Press the ↓ (down) button repeatedly, until [REGION CODE] is highlighted.
7.) Press the → (right) button. The "Region Code Menu" appears.
8.) Select the appropriate region code by pressing the ↑ (up) or ↓ (down) button respectively.
9.) Press the SET button (C).
10.)When "Power off" appears on the display, press the POWER switch on the front of the DVD
11.)Press the POWER switch again to turn power on.
Table 3-6
USA and Canada
Western Europe, Middle East, South Africa
Japan
Southeast Asia, incl. Hong Kong
Central and South America, Australia
Africa
Eastern Europe, Russia, Central Asia incl. India
China
7 DRAFT (A
EVISION
Figure 3-16 "Main Menu" - [SETUP MENU] highlighted
is highlighted.
To check the region code, see:
The message "Now loading..." appears and the system starts to save the settings.
recorder to turn power off.
TV-System and Region Code
Country
Chapter 3 - Setup Instructions
23, 2012)
UGUST
Table 3-6, "TV-System and Region Code," on page
Table 3-6, "TV-System and Region Code," on page
Region Code TV-System
1
2
2
3 PAL/NTSC
4
5
5
6
V E8 / V
OLUSON
S
ERVICE
Figure 3-10 on page
Figure 3-16
select [SETUP MENU]
Figure 3-15 on page 3-20.
NTSC
PAL
NTSC
PAL
NTSC
PAL
PAL
E6
OLUSON
M
ANUAL
3-21.
3-18.
below.
3-21.
3-21