Screen Captures And Logs; Capturing A Screen - GE Voluson E8 Service Manual

GE H DRAFT
EALTHCARE
D KTD102576, R
IRECTION
Section 7-4

Screen Captures and Logs

There may be times when the customer or field engineer will want to capture a presentation on the
screen so it may be recovered by the OnLine Center. This is accomplished by saving the image(s):
A.) to Archive and export them (as jpg, bmp or tiff) to DVD/CD+R/RW or external USB drive.
B.) as jpg and bmp to D:\export by pressing the ALT + P key on the alphanumeric keyboard.
Note: Successive ALT + P keystrokes (max. 20) overwrite existing snapshots at destination HDD!
C.) creates one snapshot (Alt-D.bmp) + "Full Backup" of the System state (fullbackup -> fb1) saved on
D:\export by pressing the ALT + D key on the alpha-numeric keyboard.
7-4-1

Capturing a screen

The following is the generic process to capture any screen from the scanner.
1.) Navigate to, and display the image/screen/volume to be captured.
2.) Press the P1, P2, P3 or P4 key (depending on system configuration) on the control panel and store
the image onto the clipboard (frame on left side of the screen).
A short summary of P1, P2, P3 and P4 key´s configuration is shown in the status area on the screen.
NOTE:
3.) Select the stored image(s) and export them to DVD/CD+R/RW, an external USB drive (optional) or
mapped Network drive (jpg, bmp, tiff or Volume file).
7 DRAFT (A
EVISION
Figure 7-10 summary of keys configuration
Chapter 7 - Diagnostics/Troubleshooting
23, 2012)
UGUST
V E8 / V
OLUSON OLUSON
S M
ERVICE ANUAL
7-9
E6