Adjustment Of Printer Settings - GE Voluson E8 Service Manual

GE H DRAFT
EALTHCARE
D KTD102576, R
IRECTION
3-7-4

Adjustment of Printer Settings

1.) After system restart, press the UTILITIES key on the control panel.
2.) In the "Utilities" menu touch SYSTEM SETUP to invoke the setup desktop on the screen.
3.) On the left side of the screen select CONNECTIVITY and then click on the
4.) Select the desired printer from the Printer Settings pull-down menu and click the EDIT button.
5.) Confirm the warning message with the YES button. The "Printer Properties" appear.
To adjust the UP-D897 B&W Printer see:
To adjust the P95D B&W Printer see:
To adjust the CP30D Color Printer see:
To adjust the UP-D25MD Color Printer see:
To adjust the UP-D23MD Color Printer see:
WARNING WARNING After each printer installation, the leakage currents have to be measured
acc. IEC 60601-1 resp. UL 60601-1.
!! WARNING:
7 DRAFT (A
EVISION
Figure 3-40 Select the desired printer
Chapter 3 - Setup Instructions
23, 2012)
UGUST
Section 3-7-4-1 "UP-D897 Printer -
Section 3-7-4-2 "P95D Printer -
Section 3-7-4-3 "CP30D Printer -
Section 3-7-4-4 "UP-D25MD Printer -
Section 3-7-4-5 "UP-D23MD Printer - Settings"
V E8 / V
OLUSON OLUSON
S M
ERVICE
PERIPHERALS tab.
select the desired printer
from the pull-down menu
Settings".
Settings".
Settings".
Settings".
E6
ANUAL
3-41