Adding Printer To The System; Adjustment Of Printer Settings - GE LOGIQ P9 Service Manual

GEDRAFT
D 5604324, R
IRECTION EVISION
3-8-4

Adding Printer to the system

1) Select Utility -> Connectivity -> Service.
2) Add the Standard Print.
3) Highlight Standard Print in the Service list.
4) Select the printer from the Printer pull-down Properties menu. For the UP-D898 printer, select
"Portrait" as orientation.
5) Type the printer name in the Name field. This name is used on the Button screen. After you select
the printer from the Printer pull-down Properties menu again, it turns white.
6) Press Save.
7) Select Button.
8) Select the appropriate print key (Print1, Print2...) from the Physical Print Buttons section.
9) Select the printer from the MyComputer column and press >> to move it to the Printflow View
column.
10) Press Save.
3-8-5

Adjustment of Printer Settings

1) Press Utility ->System ->Peripherals. Select the printer to adjust (UP-D25MD or UP-D898) from the
pull-down menu under Standard Printer Properties. Click Properties.
2) Select Properties from Printer pull-down menu.
3) Click Printing Preferences at the bottom of Properties Window.
To adjust the UP-D898 printer see:
To adjust the UP-D25MD Printer see:
After each printer installation, the leakage currents have to be measured
WARNING WARNING
acc. IEC 60601-1 resp. ANSI/AAMI ES60601-1.
!! WARNING:
11 DRAFT (J
Section 3-8-5-1 "UP-D898 - Printer Settings"
Section 3-8-5-2 "UP-D25MD - Printer Settings"
Chapter 3 - Setup Instructions
24, 2019)
ANUARY
LOGIQ P9/P7
S M
ERVICE ANUAL
.
.
3-37