Sony PMW-PZ1 Service Manual page 69

2. Remove the four screws, the heatsink (COME) and radiation sheet (252502).
(c)
PSW2 x 5
(d)
PSW2 x 5
(a)
PSW2 x 5
Note
• When installing the heatsink (COME), tighten the screws in the following sequence: (a), (b), (c), (d).
• If the radiation sheet (252502) is removed, stick it at the position as shown in the figure.
PMW-PZ1
(b)
PSW2 x 5
Heatsink (COME)
Radiation sheet
(252502)
Conductive cushion
Heatsink (COME)
Extruded portion
Edge
0 to 1mm
Radiation sheet
(252502)
5-25