If-1227 Board - Sony PMW-PZ1 Service Manual

5-12.

IF-1227 Board

Note
• When removing/installing the main board assembly, place the unit on the conductive cushion
• The eject lever for SxS card must be retracted for the work in this section.
Preparation
1. Remove the top panel. (Refer to
2. Remove the front panel assembly. (Refer to
3. Remove the front chassis assembly. (Refer
4. Remove the main board assembly. (Refer
Procedure
1. Remove the four screws.
Note
When removing screws, fix the support (M3 x 19) with nippers or the like to prevent the support from turning.
2. Remove the HPR-56 board from the connector (CN201) on the IF-1227 board.
Note
Remove the HPR-56 board with the CPU board installed.
3. Remove the four supports (M3 x 19).
PSW3 x 6
Supports (M3 x 19)
IF-1227 board
4. Install the removed parts by reversing the steps of removal.
PMW-PZ1
"5-2. Top Panel")
"5-3. Front Panel
to"5-9. Front Chassis
to"5-11. Main Board
CN6401
Assembly")
Assembly")
Assembly")
HPR-56 board
PSW3 x 6
CN201
Conductive cushion
Supports (M3 x 19)
5-23