Sony PMW-PZ1 Service Manual page 29

Starting up Windows PE
1. Press and hold the Delete key and turn on the unit.
BIOS setup window is displayed.
2. Assign the bootable USB memory of Windows PE to [Boot Option #1] under [FIXED BOOT ORDER Priorities]
in [Boot] tab.
3. Press the [F4] key to execute [Save & Reset].
The unit restarts.
Windows PE starts from the USB memory.
Tip
When the USB memory, keyboard, and mouse are not recognized normally, connect some or all of them to the
other USB connector and return to the first step.
Preparing drives
Note
If any wrong target area is specified, the SSD module may need to be replaced.
1. Execute the following commands on the displayed screen.
X:\windows\system32>diskpart
DISKPART>list volume
Volume list is displayed.
Example
Volume ### Ltr Label
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 C
Volume 1 D
Volume 2
Volume 3
Volume 4
Volume 5 F
Volume 6 E
PMW-PZ1
Fs
Windows NTFS
Work NTFS
Windows RE NTFS
Recovery NTFS
SYSTEM FAT32 Partition
WinPE FAT32 Removable
Type Size
Partition 40 GB Healthy
Partition 2048 MB Healthy
Partition 600 MB Healthy
Partition 10 GB Healthy
100 MB Healthy
Removable 0 B No Media
XXX MB Healthy
Status Info
Hidden
Hidden
Hidden
1-21