Sony PMW-PZ1 Service Manual page 30

2. Find out the volume number of Windows area.
Make sure that "Volume 0" is shown in the Volume ### column for the volume of which Label column is shown
as "Windows" and Size column "40 GB".
3. Find out the volume number of Work area.
Make sure that "Volume 1" is shown in the Volume ### column for the volume of which Label column is shown
as "Work" and Size column "2048 MB".
4. Find out the volume number of Recovery area.
Make sure that "Volume 3" is shown in the Volume ### column for the volume of which label column is shown
as "Recovery".
Note
The assigned letters of the volumes differ depending on the environment.
Tip
Volume 6 as E drive: USB memory in which Windows PE is stored
Volume 5 as F drive: SxS slot
Volume 0 through 4: Partitions on the SSD
5. Execute the following commands for the area of Volume 1 (2048 MB, Label: Work) found out in step three to
initialize the volume.
DISKPART>select volume 1
DISKPART>format quick fs=ntfs label="Work"
The Work area is formatted.
6. Execute the following commands for the area of Volume 3 (10 GB, Label: Recovery) found out in step four.
DISKPART>select volume 3
DISKPART>assign letter=R
Drive letter of "R" is added to the Recovery area.
7. Execute the following command.
DISKPART>list volume
Volume list is displayed.
Example
Volume ### Ltr Label
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 C
Volume 1 D
Volume 2
* Volume 3 R
Volume 4
Volume 5 F
Volume 6 E
8. Make sure that "R" is shown in the Ltr column for Volume 3.
9. Execute the following command.
DISKPART>exit
"Leaving Diskpart..." is displayed, and then DISKPART command is closed.
Recovering OS
1. Start the command prompt.
PMW-PZ1
Fs
Windows NTFS
Work NTFS
Windows RE NTFS
Recovery NTFS
SYSTEM FAT32 Partition
WinPE FAT32 Removable
Type Size
Partition 45 GB Healthy
Partition 2048 MB Healthy
Partition 600 MB Healthy
Partition 10 GB Healthy
100 MB Healthy
Removable 0 B No Media
XXXX MB Healthy
Status Info
Hidden
Hidden
Hidden
1-22