Sony PMW-PZ1 Service Manual page 54

3. Remove the LCD unit.
(1) Release the eight hooks, and open the LCD unit in the direction of the arrow.
Note
Be careful not to deform the metal plate.
Tip
Hooks can easily be released by pushing the back side of the LCD unit through the two holes of the metal
plate.
(2) Disconnect the flexible board from the connector (CN300) on the DY-27 board.
LCD unit
Hooks
LCD unit
Metal plate
Holes
4. Remove the power button (top) from the switch of the DY-27 board.
Power button (top)
Switch
DY-27 board
PMW-PZ1
Hooks
Metal plate
CN300
(DY-27 board)
Hooks
LCD unit
Flexible board
5-10