5-9.
Front Chassis Assembly
Preparation
1.
Remove the top panel. (Refer to
2.
Remove the front panel assembly. (Refer to
Procedure
1.
Remove the front chassis assembly.
(1) Disconnect the harness from the connector (CN5601) on the HPR-56 board.
(2) Remove the two screws, and remove the front chassis assembly.
Front chassis assembly
Harness
2.
Install the removed parts by reversing the steps of removal.
PMW-PZ1
"5-2. Top
Panel")
"5-3. Front Panel
PSW3 x 6
HPR-56 board
CN5601
Assembly")
5-17