5-8.
SSD Module (mSATA)
Note
• There are two types of fixing methods for the SSD module (mSATA) of the unit: latch type and screw type, which
differ depending on the product. This section describes how to replace the SSD module (mSATA) for each of these
methods.
• The cushion is not reusable.
Necessary part (for latch type)
• Cushion (1)
5-8-1.
Replacement (Latch Type)
Preparation
1.
Remove the top panel. (Refer to
Procedure
1.
Release the two stoppers in the direction of arrows A, then peel off the adhesive part of the cushion in the direction
of arrow B.
Note
Do not pull the center black part that is not movable.
PMW-PZ1
"5-2. Top
Panel")
5-14