Replacement (Screw Type) - Sony PMW-PZ1 Service Manual

2. Remove the SSD module (mSATA) from the connector (CN6202) on the HPR-56 board in the direction of the
arrow C.
Note
The cushion has strong adhesive power. When removing the cushion, note the following instructions.
• Do not apply excessive force to the HPR-56 board and the SSD module (mSATA).
• Do not damage electrical parts mounted on the back side of the SSD module (mSATA) and components on
the HPR-56 board with tools.
SSD module (mSATA)
CN6202
Note
When installing the SSD module (mSATA), note the following instructions.
• Insert the SSD module (mSATA) securely into the connector (CN6202).
• Do not connect the SSD module (mSATA) to the connector (CN6203).
3. Remove the cushion from the SSD module (mSATA).
4. Install the removed parts by reversing the steps of removal.
5-8-2.

Replacement (Screw Type)

Preparation
1. Remove the top panel. (Refer to
PMW-PZ1
Cushion
HPR-56 board
CN6203
"5-2. Top Panel")
Back side of SSD module (mSATA)
Electrical parts
SSD module (mSATA)
SSD module
(mSATA) )
Cushion
Stopper
A
Black part
A
Stopper
C
Cushion
B
5-15