Sony PMW-PZ1 Service Manual page 24

15. Press the enter key according to displayed messages a few times.
Note
Do not close the command prompt by close button that is located at the upper right of the window.
It takes time before the process is completed and the window closes automatically.
16. Open the following folder by Windows Explorer.
C:\Program Files\Sony\tools\
17. Right-click [UWF_Enable-RAM] (Type: Windows Batch File), and then click [Run as administrator].
The batch file is executed.
18. Press the enter key according to displayed messages a few times.
Note
Do not close the command prompt by close button that is located at the upper right of the window.
19. After Windows shuts down, disconnect the PC monitor.
20. Update the software. (Refer to
PMW-PZ1
"1-8. Software Update")
1-16