System Menu (M6) - Honeywell NX series User Manual

7.3.6

System menu (M6)

The System menu can be entered from the main menu by pushing the
indication M6 is visible on the display.
The controls associated with the general use of the frequency converter, such as application selection,
customised parameter sets or information about the hardware and software are located under the System
menu. The number of submenus and subpages is shown with the symbol S (or P) on the
On page 89 you will find a list of the functions available in the System menu.
Functions in the System menu
Code Function
Language
S6.1
selection
Application
S6.2
selection
S6.3 Copy parameters
S6.3.1 Parameter sets
S6.3.2 Load up to keypad
Load down from
S6.3.3
keypad
P6.3.4 Parameter backup
S6.4 Compare parameters
S6.4.1 Set1
S6.4.2 Set2
S6.4.3 Factory settings
S6.4.4 Keypad set
S6.5 Security
S6.5.1 Password
P6.5.2 Parameter lock
S6.5.3 Start-up wizard
S6.5.4 Multimonitoring items
S6.6 Keypad settings
P6.6.1 Default page
Default page/
P6.6.2
Operating menu
P6.6.3 Timeout time
P6.6.4 Contrast
P6.6.5 Backlight time
S6.7 Hardware settings
Internal brake
P6.7.1
resistor
CONTROL KEYPAD
Min Max Unit
0 65535 s
0 31
Always 65535 min
Menu button right
Default Cust
Available selections depend
English
on the language package.
Basic Application
Standard Application
Local/Remote control Appl.
Basic
Multi-Step Application
Application
PID Control Application
Multi-Purpose Control Appl.
Pump and Fan Control Appl.
Store set 1
Load set 1
Store set 2
Load set 2
Load factory defaults
All parameters
All parameters
All but motor parameters
Application parameters
Yes
Yes
No
Not used
Not used
Not used 0=Not used
Change Change Enabled
Enabled Change Disabled
No
Yes
Change Enabled
Change Disabled
30
18
10
Not connected
Connected
Connected
7
89(110)
when the location
value line.
Selections