Honeywell NX series User Manual page 102

STOP READY
Trip counters
T1 T5
STOP READY
Clr Optime cntr
Reset
Figure 7-24. Counter reset
Software (S6.8.3)
The Software information page includes information on the following frequency converter software related
topics:
Page
6.8.3.1 Software package
6.8.3.2 System software version
6.8.3.3 Firmware interface
6.8.3.4 System load
Table 7-9. Software information pages
Applications (S6.8.4)
At location S6.8.4 you can find the Applications submenu containing information about not only the
application currently in use but also all other applications loaded into the frequency converter. The
information available is:
Page
6.8.4.# Name of application
6.8.4.#.1 Application ID
6.8.4.#.2 Version
6.8.4.#.3 Firmware interface
Table 7-10. Applications information pages
READY
I/Oterm
Applications
A7
A1
Figure 7-25. Applications info page
CONTROL KEYPAD
STOP READY
Clr Optime cntr
Not reset
STOP READY
Clr Optime cntr
enter
Reset
Content
Content
I/Oterm
Standard
D1 D3
READY
I/Oterm
Basic
D3
D1
READY
Clr Optime cntr
Not reset
STOP READY
Clr Optime cntr
Not reset
I/Oterm
Version
2.01
READY
I/O term
Application id
NXFIFF01
7
101(110)