Honeywell NX series User Manual page 98

Default page (P6.6.1)
Here you can set the location (page) to which the display automatically moves as the Timeout time (see
below) has expired or as the power is switched on to the keypad.
If the Default Page value is 0 the function is not activated, i.e. the last displayed page remains on the
keypad display. Press the Menu button right once to enter the edit mode. Change the number of the Main
menu with the Browser buttons. Pressing the Menu button right once again makes you able to edit the
number of the submenu/page. If the page you want to move to by default is at the third level repeat the
procedure. Confirm the new default page value with the Enter button. You can return to the previous step
anytime by pushing the Menu button left.
READY
I/Oterm
Default page
0.
Figure 7-19. Default page function
Default page in the operating menu (P6.6.2)
Here you can set the location (page) in the Operating menu (in special applications only) to which the
display automatically moves as the set Timeout time (see below) has expired or as the power is switched
on to the keypad. See setting of Default page above.
Timeout time (P6.6.3)
The Timeout time setting defines the time after which the keypad display returns to the Default page
(P6.6.1) see above.
Move to the Edit menu by pressing the Menu button right. Set the timeout time you want and confirm the
change with the Enter button. You can return to the previous step anytime by pushing the
READY
Timeout time
90 s
Figure 7-20. Timeout time setting
Note: If the Default page value is 0 the Timeout time setting has no effect.
Contrast adjustment (P6.6.4)
In case the display is unclear you can adjust its contrast through the same procedure as that for the
timeout time setting (see above).
Backlight time (P6.6.5)
Giving a value for the Backlight time, you can determine how long the backlight stays on before going out.
You can select here any time between 1 and 65535 minutes or 'Forever'. For the value setting procedure
see Timeout time (P6.6.3).
CONTROL KEYPAD
READY
I/Oterm
Default page
0.
READY
Timeout time
90 s.
READY
I/Oterm
Default page
1.
READY
Timeout time
60 s.
97(110)
enter
CONFIRM CHANGE
REPEAT TO SET
DEFAULT SUBMENU/PAGE
CANCEL
Menu button left.
CONFIRM CHANGE
enter
CANCEL
7