Figure 9: Led - GE CM6 Hardware Reference Manual

Reset
GE Intelligent Platforms – CM6 Hardware Reference Manual, Fourth Edition
Table 23: Boot and Status LED indication
Status
+3.3 V stable but at least one internal
voltage missing
Power-up, still Reset state
System Status – board is running
User status
The reset logic is controlled by the CPLD. The reset logic monitors all voltage
and reset sources and only if all internal voltages are above a minimum level
and all reset sources inactive the reset is released and the CPU may start with
code execution. The reset source is monitored by the Reset Source Register
(RSR) within the CPLD see section CPLD registers for description.
The following table lists all possible sources of reset.

Figure 9: LED

LED color
Red on
Amber on
Green on
Red/green/amber
Page 63