ACM 150
Relay output control panel
The Relay control panel provides both status and control. When the ACM 150
monitor activates a relay, the corresponding LED lights and remains lit until the
condition clears or the relay is reset. The 80 alarm relays have a momentary test
switch, which is active in the Front Panel Mode. Relays 82–86 can only be tested
from the computer, in the Manual Mode. In other modes the switches are inactive.
Figure 18. Relay control panel
The Control Panel Status LEDs for Power On, Manual Mode and Comm. Active have
the same functions as the other control panels. Refer to
Control panel
32
status.