Honeywell ACM 150 Manual To Installation, Operation, And Maintenance page 145

Air composition monitor
Table of Contents

Advertisement

 
ACM 150
Trade name: Zinc Selenide
Precautions for safe handling:
Thorough dedusting.
Ensure good ventilation/exhaustion at the workplace. Open and handle
receptacle with care.
Information about fire and explosion protection: Keep respiratory protective device
available
Storage (conditions for safe storage, including any incompatibilities)
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: Keep container tightly sealed.
Specific end use(s) No further relevant information available.
Additional information about design of technical facilities: No further data; see item
7.
8 Exposure controls/personal protection
1315-09-9 zinc selenide
WEL:Long-term value: 0.1 mg/m³ as Se
Personal protective equipment
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work. Store protective clothing
separately.
Respiratory protection: In case of brief exposure or low pollution use respiratory
filter device. In case of intensive or longer exposure use self-contained respiratory
protective device.
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the
substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for
the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates
of diffusion and the degradation.
Material of gloves: The selection of the suitable gloves does not only depend on
the material, but also on further marks of quality and varies from manufacturer to
manufacturer.
Penetration time of glove material: The exact break trough time has to be found out
by the manufacturer of the protective gloves and has to be observed.
Eye protection: Not required
9 Physical and chemical properties
General Information
 
145

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents