Table of Contents
Advertisement
ACM 150
Using a USB memory stick, passwords may now be transferred securely from one
ACM 150 to another. To do this, proceed as described below:
•
Login directly at the source ACM 150 using the Master Code.
•
Go to the Access Codes screen and press "Save Passwords to
USB Drive".
•
Remove the USB drive and insert it into the target ACM 150.
•
Login directly at the target ACM 150 using the Master Code.
•
Go to the Access Codes screen and press "Load Passwords from the USB Drive"
and confirm by pressing "OK".
NOTE
If the Master Code on the target ACM 150 differs from that on the source ACM
150, you will have to manually change the Master Code on the target ACM 150
directly after importing the password there.
The Administrator may choose to increase the number of access levels by
assigning higher values for individual screens and users. For enhanced security
this feature is described in an external document.
Restricting access to the ACM 150 monitor increases security and control over
the monitoring system. Also, it limits the opportunity for errors. Only one or two
employees should know the Master Code.
94
Hide quick links:
Advertisement
Table of Contents
