Honeywell ACM 150 Manual To Installation, Operation, And Maintenance page 83

ACM 150
Figure 47. Point status
Reviewing and changing point configurations
Until you login with an access code, you can only review but not change point
configurations. After you login, the display changes to open up your configuration
options.
Setup of unconfigured sample points
When you select an unconfigured point, all of the available methods are displayed.
If the ACM 150 monitor monitors only a short list of gases, you may have only
one method. If you have a large number of gases, you will have multiple methods
installed.
NOTE
A method is a group of gases. A Honeywell Analytics application chemist
reviews the list of gases you want the ACM 150 monitor to monitor at each
sample point, arranges them into logical groups and develops the groups into
methods (described in section
point, you may choose gases from one or multiple methods.
Analytical methods). When configuring a sample
83