Honeywell ACM 150 Manual To Installation, Operation, And Maintenance page 93

ACM 150
Figure 56. Access codes
Default Access Level
Level "0"
Level "1"
Level "2"
Level "3"
Level "99"
Functional range
View most screens
Demand Scan (2 successive scans on one point)
Level "0"
+ Reset Alarms
+Reset Service Events
+ Lock-On Scan
Level "1"
+ Change Point Configuration
+ Change Order of Scan
Everything except Access Codes. Only the Administrator
may change Access Codes and Levels.
Administrator using Master Code.
(This access level cannot be changed.)
93