Implementing The Required Changes In The Site Configuration - Honeywell CIU 888 Migration Manual

FIGURE 4-1
FIGURE 4-2
4 - 2
Updating CIU 888 Site configuration
the CIU 888 (see FIGURE 4-1). See Chapter 1 for more information
about the CIU 888 Configuration System.
CIU 888: Service port
During updating of the CIU 888 site configuration, the Entis Pro

system connected to the CIU 888 must be shut down.

4.2 Implementing the required changes in the site configuration

The first step in updating the CIU 888 site configuration is implementing
the required changes in the site configuration.
Procedure:
1. Launch Ensite Pro, see section 1.2.1.
The Ensite Pro tool bar is displayed (see FIGURE 4-2).
Ensite Pro: Tool bar - Only Select Site button is active
Ensite Pro to CIU 888 Migration Manual
CIU 888
Part No.: 4417593_Rev09