Honeywell CIU 888 Migration Manual page 37

Part No.: 4417593_Rev09
Commissioning of a Standalone System Setup
4. Creating and configuring the tanks
Tank strapping tables or tank capacity tables can be linked via an
external file.
5. Creating and configuring the CIU Prime(s)
In the CIU Prime, the following parts can be configured:
Host port 1

Host port 2

Hot standby (required if redundant CIU Primes are installed)

Field ports 1 through 4

6. Creating and configuring the CIU Plus(es)
In the CIU Plus, the following parts can be configured:
Host ports 1 through 4 (required to make the CIU Plus compatible

with the connected hardware and software, i.e. Entis Pro, PLC or
DCS
Hot standby (required if redundant CIU Primes and/or CIU

CIU Pluses are installed)
Field port 1

Field port 2

7. Linking of the data inputs, tanks and CIUs
The site configuration created with Ensite Pro is saved as a Microsoft
Access Database
'[Drive:]\Users\Public\Documents\Enraf\Ensite
Pro\SiteDatabase\SiteName' (see FIGURE 2-11).
This folder also contains the following sub-folders:
INI

This folder is reserved for Entis Pro INI files generated with
Ensite Pro.
LOG

This folder is reserved for log files.
STR

This folder is reserved for strapping table files linked to the tanks in
the site configuration.
Ensite Pro to CIU 888 Migration Manual
CIU 888
file (*.mdb file) in the folder
2 - 11