Honeywell CIU 888 Migration Manual page 73

NOTE: The difference between the Create New Configuration option and the Update
TABLE 4-1
CAUTION! If the user selects Migration Type as "Create New
FIGURE 4-6
Part No.: 4417593_Rev09
Updating CIU 888 Site configuration
Migration Type

Select the Update Configuration option.
Configuration option is described in TABLE 4-1:
Difference between Create New Configuration and Update Configuration option
Create New Configuration:
Update Configuration
INI File Path

When the Ensite Pro site database file has been selected, the
path to the folder where the INI files will be stored is automatically
selected. If necessary, you can change the folder by clicking
(Browse) to browse to the appropriate folder.
Remember settings

Select the check box if the current settings must be saved.
Configuration" instead of "Update Configuration" and
tries to Upload the configuration to CIU 888, it may
trigger unexpected results and user may not be able
to perform update configuration again. The only way
to recover from this situation is to do a factory reset
of the CIU 888 and recommission the CIU 888.
3. Click Upload to CIU 888.
If the implemented changes do not require a restart of the CIU 888,
the following dialogue box is displayed:
Migration tool: Migration Status dialogue box (No restart of CIU 888 required)
Ensite Pro to CIU 888 Migration Manual
CIU 888
Deletes the existing site configuration completely (if
already uploaded) and uploads the new site configura-
tion to the CIU 888.
The Create New Configuration operation can only be
performed after a Reset to Factory Defaults operation
via the CIU 888 display has been performed or after
the CIU 888 has been dispatched from the factory.
Uploads the implemented changes to the site configu-
ration that is already uploaded to the CIU 888. An
Update Configuration operation is allowed only on a
commissioned CIU 888.
4 - 5