Generating Ini Files; Uploading The Site Configuration To The Ciu 888 - Honeywell CIU 888 Migration Manual

FIGURE 2-11
2 - 12
Commissioning of a Standalone System Setup

2.3.4 Generating INI files

When the site configuration has been set up according to one of the
supported topologies of deployment, the next step is to generate the
INI files needed for Entis Pro.
Refer to the Instruction manual Ensite Pro Configuration Tool version
3.0 (Part No. 4416593) for detailed information about generating
INI files using Ensite Pro.

2.4 Uploading the site configuration to the CIU 888

When the site configuration has been set up and the INI files have been
generated, the next step is to upload the site configuration to the
CIU 888 using the Ensite Pro to CIU 888 Migration tool.
1. Launch the Ensite Pro to CIU 888 Migration tool.
The Ensite Pro to CIU 888 Migration tool is launched.
Ensite Pro to CIU 888 Migration tool
2. Enter the following information:
Ensite Pro Site Database File

Select the Ensite Pro site database file (*.mdb file). Click
(Browse) to browse to the appropriate folder and select the *.mdb
file.
After selecting the Ensite Pro site database file, the file name
including the full path is displayed.
Ensite Pro to CIU 888 Migration Manual
CIU 888
Part No.: 4417593_Rev09