Honeywell CIU 888 Migration Manual page 60

FIGURE 3-8
3 - 10
Commissioning of a Redundant System Setup
The Hot standby configuration settings of the secondary CIU Prime
are automatically configured based on the settings of the primary
CIU Prime (see FIGURE 3-8).
Ensite Pro: Hot standby configuration settings of the secondary CIU Prime
The site configuration for a redundant system setup contains two

CIU Pluses: a primary CIU Plus and a secondary CIU Plus. The
configuration settings of both CIU Pluses must be the same with the
exception of the RTU addresses of the configured host ports. These
must be unique.
Ensite Pro to CIU 888 Migration Manual
CIU 888
Part No.: 4417593_Rev09