W&M Lock Key Switch And Configuration Lock Key Switch; W&M Lock Key Switch; Unlocking The W&M Relevant Configuration Settings - Honeywell CIU 888 Migration Manual

FIGURE 5-6
5 - 4
General CIU 888 Functions
5.2 W&M lock key switch and Configuration lock key switch
The CIU 888 features two key switches located at the front of the
device:
W&M lock key switch, see section 5.2.1.

Configuration lock key switch, see section 5.2.2.

5.2.1 W&M lock key switch
The W&M lock key switch is used for locking and unlocking the W&M
relevant configuration settings of the CIU 888. The key switch is located
at the front of the CIU 888, and is fitted with a cover (see FIGURE 5-6).
CIU 888: W&M lock key switch
5.2.1.1 Unlocking the W&M relevant configuration settings
Perform the following steps to unlock the W&M relevant configuration
settings of the CIU 888:
1. If the cover of the W&M lock key switch is sealed, remove the
hardware seal (wire) in order to get access to the key switch.
2. Take the key for locking/unlocking the W&M relevant configuration
settings and insert it in the key switch. Next, turn the key counter-
clockwise.
Ensite Pro to CIU 888 Migration Manual
CIU 888
Part No.: 4417593_Rev09