Honeywell CIU 888 Migration Manual page 39

NOTE: The difference between the Create New Configuration option and the Update
TABLE 2-1
FIGURE 2-12
Part No.: 4417593_Rev09
Commissioning of a Standalone System Setup
Enter Service Port Address

The IP address 192.168.1.1 is displayed. Leave this address
unchanged.
User Name

Enter the user name, i.e. ciuadmin.
Password

Enter the password of the ciuadmin user account.
Migration Type

Select the Create New Configuration option.
Configuration option is described in Table 2-1:
Difference between Create New Configuration option and Update Configuration option
Create New Configuration:
Update Configuration
INI File Path

When the Ensite Pro site database file has been selected, the
path to the folder where the INI files will be stored is automatically
selected. If necessary, you can change the folder by clicking
(Browse) to browse to the appropriate folder.
Remember settings

Select the check box if the current settings must be saved.
3. Click Upload to CIU 888.
The following dialogue box is displayed (see FIGURE 2-12).
Successfully Migrated dialogue box
Ensite Pro to CIU 888 Migration Manual
CIU 888
Deletes the existing site configuration completely (if
already uploaded) and uploads the new site configura-
tion to the CIU 888.
The Create New Configuration operation can only be
performed after a Reset to Factory Defaults operation
via the CIU 888 display has been performed or after
the CIU 888 has been dispatched from the factory.
Uploads the implemented changes to the site configu-
ration that is already uploaded to the CIU 888. An
Update Configuration operation is allowed only on a
commissioned CIU 888.
2 - 13