Honeywell CIU 888 Migration Manual page 35

FIGURE 2-9
Part No.: 4417593_Rev09
Commissioning of a Standalone System Setup
FIGURE 2-9 shows an example of how the CIU Plus/CIU Prime host
ports are mapped to the CIU 888 host ports in the site configuration.
Mapping of CIU Prime/CIU Plus host ports to CIU 888 host ports
CIU Prime host port 1 is ignored

CIU Prime host port 2 is mapped to CIU 888 fixed host port 2

CIU Plus host port 1 is mapped to CIU 888 fixed host port 1

CIU Plus host port 3 is mapped to CIU 888 optional slot 5

CIU Plus host port 4 is mapped to CIU 888 optional slot 6

CIU emulation (compatible with the CIU 858) can be configured for any
of the CIU 888 host ports. For example: If CIU 888 fixed host port 2
must be enabled for CIU emulation, then in the site configuration
CIU Plus host port 2 must be left unconfigured (as shown in FIGURE 2-
Ensite Pro to CIU 888 Migration Manual
CIU 888 2 - 9