Honeywell CIU 888 Migration Manual page 46

FIGURE 2-16
FIGURE 2-17
2 - 20
Commissioning of a Standalone System Setup
2. Click CONFIGURE in the section menu bar.
The Configure window is displayed (see FIGURE 2-16).
CIU 888 Web interface: Configuration window
3. Click End Commissioning.
The following dialogue box is displayed (see FIGURE 2-17).
Commissioning ended successfully dialogue box
4. Click OK to close the dialogue box.
The CIU 888 restarts. When the CIU 888 is restarted, it will run using
the new site configuration.
Ensite Pro to CIU 888 Migration Manual
CIU 888
Part No.: 4417593_Rev09