Configuration Procedure In Ensite Pro - Honeywell CIU 888 Migration Manual

FIGURE 2-10
NOTE: Refer to the Protocol Manual - CIU Emulation (Part No. 4417589) for more
NOTE: For more details, refer to the Instruction manual Ensite Pro Configuration Tool
2 - 10
Commissioning of a Standalone System Setup
9). CIU emulation can be configured via CIU Prime host port 2 (see
FIGURE 2-10).
Ensite Pro: Edit CIU Prime window - CIU emulation enabled
information about CIU Emulation.

2.3.3 Configuration procedure in Ensite Pro

The complete configuration procedure in Ensite Pro consists of the
following steps:
version 3.0 (Part No. 4416593).
1. Preparation
Before starting with creating and configuring the site, a number of
details must be known, e.g. site layout, information about field
cabling, tag names of site elements (i.e. gauges, tanks and CIUs),
tank information (tank strapping tables or tank capacity tables, roof
details, etc.), information on types of stored product, host
communication setup (if applicable).
2. Creating the site and defining the global settings
The creation of the site allows Ensite Pro to store a configuration set
with a database. The global settings are required for initiating the
configuration database. When the global settings have been defined,
Ensite Pro will create a site database.
3. Retrieving the configuration settings of the tank gauges
Ensite Pro to CIU 888 Migration Manual
CIU 888
Part No.: 4417593_Rev09