Table Of Contents; Installation Procedure - Honeywell RedLink Installation Manual

RedLINK™ Installation Guide (TrueZONE™)
System installation at a glance
Remote
control

Installation procedure

This document covers linking and installation procedures for FocusPRO
wireless thermostats and RedLINK accessories in TrueZONE applications.
Before you begin, you must mount, wire & configure the TrueZONE
panel and wireless adapter (see TrueZONE Installation Guide), then follow
steps below.
You must configure the TrueZONE panel before you begin
1
Install batteries in wireless devices ................................Page 3
2
Link all devices to wireless network ..........................Pages 3-5
3
Exit wireless setup ............................................................Page 6
4
Customize thermostat (installer setup) ....................Pages 6-10
5
Mount thermostat and outdoor sensor..........................Page 11
To replace system components if needed, see page 13
If you have more than one TrueZONE Panel: Thermostats are linked to specific zone
panels. Optional accessories must be linked to each zone panel separately.
Thermostat
Wireless
adapter
Thermostat
TrueZONE
equipment
panel
2
Outdoor
air sensor
HVAC