Honeywell SmartVFD HVAC MR4 User Manual page 95

Honeywell
• 23
3.3 HVAC Application - Quick setup parameter group
The Quick Setup parameter group is a collection of parameters that are most commonly used
during installation and commissioning. They are collected in the first parameter group so that
they can be found fast and easily. They can, however, be also reached and edited in their ac-
tual parameter groups. Changing a parameter value in the Quick setup group also changes the
value of this parameter in its actual group.
Code Parameter
M1.1 Motor nominal voltage
Motor nominal fre-
M1.2
quency
M1.3 Motor nominal speed
M1.4 Motor nominal current
M1.5 Motor Cos Phi
M1.6 Motor nominal power
M1.7 Motor current limit
M1.8 Minimum frequency
M1.9 Maximum frequency
I/O control reference A
M1.10
selection
M1.11 Preset frequency 1
M1.12 Preset frequency 2
M1.13 Acceleration time 1
M1.14 Deceleration time 1
M1.15 Remote control place
M1.16 Automatic reset
M1.17 PID Mini-Wizard
Min Max Unit
Varies Varies V
8.00 320.00 Hz
24 19200 rpm
Varies Varies A
0.30 1.00
0.00 Varies kW
Varies Varies A
0.00 M3.3.1 Hz
M3.3.1 320.00 Hz
1 8
M3.3.1 300.00 Hz
M3.3.1 300.00 Hz
0.1 3000.0 s
0.1 3000.0 s
1 2
0 1
0 1
Default ID
Find this value U n on the
Varies 110
rating plate of the motor.
See page 33.
Find this value f n on the rat-
60.00 111
ing plate of the motor. See
page 33.
Find this value n n on the rat-
1720 112
ing plate of the motor.
Find this value I n on the rat-
Varies 113
ing plate of the motor.
Find this value on the rating
0.80 120
plate of the motor
Find this value I n on the rat-
Varies 116
ing plate of the motor.
Maximum motor current
Varies 107
from AC drive
Minimum allowed frequency
Varies 101
reference
Maximum allowed frequency
60.00 102
reference
Selection of ref source when
7 117 control place is I/O A. See
page 36 for selections.
Select with digital input:
10.00 105 Preset frequency selection 0
(M3.5.1.16)
Select with digital input:
15.00 106 Preset frequency selection 1
(M3.5.1.17)
Time to accelerate from zero
20.0 103
to maximum frequency
Time to decelerate from min-
20.0 104
imum to zero frequency
Selection of remote control
place (start/stop)
1 172
1 = I/O
2 = Fieldbus
0 = Disabled
0 731
1 = Enabled
0 = Inactive
0 1803 1 = Activate
See chapter 1.2.
HVAC A
PPLICATION
Description