Honeywell SmartVFD HVAC MR4 User Manual page 133

Honeywell
• 61
3.5.15.3 Feedback
For more detailed information, see chapter 3.5.14.
Code Parameter
M3.13.3.1 Feedback function
Feedback function
M3.13.3.2
gain
Feedback 1
M3.13.3.3
source selection
M3.13.3.4 Feedback 1 minimum
M3.13.3.5 Feedback 1 maximum
Feedback 2
M3.13.3.6
source selection
M3.13.3.7 Feedback 2 minimum
M3.13.3.8 Feedback 2 maximum
3.5.15.4 Process supervision
For more detailed information, see chapter 3.5.14.
Code Parameter
M3.13.4.1 Enable supervision
M3.13.4.2 Upper limit
M3.13.4.3 Lower limit
M3.13.4.4 Delay
Min Max Unit
1 9
-1000.0 1000.0 %
0 14
-200.00 200.00 %
-200.00 200.00 %
0 14
-200.00 200.00 %
-200.00 200.00 %
Table 48.
Min Max Unit
0 1
Varies Varies Varies
Varies Varies Varies
0 30000 s
Table 49.
HVAC A
Default ID
1 1650
100.0 1651
1 1652
Minimum value at analog
0.00 1653
signal minimum.
Maximum value at analog
100.00 1654
signal maximum.
2 1655
Minimum value at analog
0.00 1656
signal minimum.
Maximum value at analog
100.00 1657
signal maximum.
Default ID
0 = Disabled
0 1659
1 = Enabled
Varies 1660
Varies 1661
If the desired value is not
0 1662 reached within this time a
fault or alarm is activated.
PPLICATION
Description
Description