Frame Mr9 - Honeywell SmartVFD HVAC MR4 User Manual

Honeywell
• 45
5.2.3

Frame MR9

Follow the procedure described above to modify the EMC protection of the AC drive of frame
MR9 to EMC-level T.
Find the
1
AC drive and locate the place for the connector next to the fan. Push the Molex
connector in its place. See Figure 46.
Molex connector
Further remove the extension box cover (1), the touch shield (2) the I/O plate (4)
2
with I/O grommet plate (3). Locate the EMC jumper on the EMC board (see mag-
nification below) and remove it.
Molex connector in the accessories bag. Remove the main cover of the
Figure 46.
Figure 47.
C
OMMISSIONING