Honeywell SmartVFD HVAC MR4 User Manual page 75

Honeywell
• 3
Push the OK button unless you want to set all parameter values manually.
Choose your process
7
Set value for
8
Speed
(according to nameplate)
Set value for
9
rent (according to nameplate)
10
Set value for
11 Set value for
Now the Startup Wizard is done.
The Startup Wizard can be re-initiated by activating the parameter
Parameter backup
(par. M6.5.1) in the
setup menu.
STOP NotRDY

Startup Wizard?
STOP NotRDY

Fan or Pump?
Motor Nominal
Motor Nominal Cur-
Minimum Frequency Range:
Maximum Frequency Range:
submenu (M6.5) OR with parameter M1.19 in the Quick
Keypad
1
Yes
No
Pump
Fan
Keypad
1
Pump
Fan
Range: 24...19,200 rpm
Range: Varies
0.00...50.00 Hz
0.00...320.00 Hz
Restore factory defaults
S
TARTUP