Honeywell SmartVFD HVAC MR4 User Manual page 88

G -
RAPHIC KEYPAD INTRODUCTION
2.4.5 I/O and hardware
Various options-related settings are located in this menu.
2.4.5.1 Basic I/O
Monitor here the statuses of inputs and outputs.
Code Parameter
M5.1.1 Digital input 1
M5.1.2 Digital input 2
M5.1.3 Digital input 3
M5.1.4 Digital input 4
M5.1.5 Digital input 5
M5.1.6 Digital input 6
M5.1.7 Analog input 1 mode
M5.1.8 Analog input 1
M5.1.9 Analog input 2 mode
M5.1.10 Analog input 2
M5.1.11 Analog output 1 mode
M5.1.12 Analog output 1
M5.1.13 Relay output 1
M5.1.14 Relay output 2
M5.1.15 Relay output 3
Table 5. I/O and Hardware menu, Basic I/O parameters
2.4.5.2 Option board slots
The parameters of this group depend on the option board installed. If no option board is placed
in slots D or E, no parameters are visible.
Menu
Slot D
Slot E
Min Max
0 1
0 1
0 1
0 1
0 1
0 1
1 5
0 100
1 5
0 100
1 5
0 100
0 1
0 1
0 1
Function
Settings
Monitoring
Settings
Monitoring
Unit Default ID
%
%
%
Note
Option board related settings.
Monitor option board-related info.
Option board related settings.
Monitor option board-related info.
Honeywell
Description
Status of digital input signal
Status of digital input signal
Status of digital input signal
Status of digital input signal
Status of digital input signal
Status of digital input signal
Analog input signal mode
Status of analog input signal
Analog input signal mode
Status of analog input signal
Analog output signal mode
Status of analog output sig-
nal
Status of digital output signal
Status of digital output signal
Status of digital output signal
• 16