Receipt Of Delivery; Product Modified' Sticker; Unpacking And Lifting The Drive - Honeywell SmartVFD HVAC MR4 User Manual

R
ECEIPT OF DELIVERY
2. R
ECEIPT OF DELIVERY
Check the correctness of delivery by comparing your order data to the drive information found
on the package label. If the delivery does not correspond to your order, contact the supplier
immediately. See chapter 2.3.
2.1

'Product modified' sticker

In the small plastic bag included with delivery you will find a silver
The purpose of the sticker is to notify the service personnel about the modifications made in
the drive. Attach the sticker on the side of the drive to avoid losing it. Should the drive be later
modified mark the change on the sticker.
2.2

Unpacking and lifting the drive

The weights of the drives vary greatly according to the size. You may need to use a piece of
special lifting equipment to remove the drive from its package. Note the weights of each indi-
vidual frame size in Table 2 below.
If you decide to use a piece of lifting equipment see picture below for recommendations to lift
the drive.
Product modified
Figure 1. 'Product modified' sticker
Frame Weight [kg]
MR4 6.0
MR5 10.0
MR6 20.0
MR7 37.5
MR8 70.0
MR9 108.0
Table 2. Frame weights
Product modified
Date:
Date:
Date:
Weight [lb.]
13.2
22.0
44.1
82.7
154.3
238.1
Honeywell
• 6
sticker.
2